
Section 4 Troubleshooting
Message | Procedure | Page | |
|
|
| |
“Communication Error” | An error has occurred during a fax transmission or fax reception. Check the error code – that |
| |
| indicates the origin of the error – on the corresponding Transmission Report (or Reception |
| |
| Report) that is printed out in order to confirm the cause of the error. |
| |
|
|
| |
“No DC Loop” | The modular cord may not be connected properly to either the telephone or the line jack (L) |
| |
“No Dial Tone” | on the fax. Either that, or there is a problem with the telephone line. In this case, contact | ______ | |
| your telephone company. |
| |
|
|
| |
“No Response” | Dialing was accomplished, but connection to the other party was not possible. Check with the | ______ | |
| other party. | ||
|
| ||
|
|
| |
“No encryption code is | The destination was dialed using a | ||
registered.” | Transmission, but the Encrypted Transmission was not possible because the corresponding | ||
| Encryption Key is no longer registered in your fax. | ||
|
| ||
|
|
|