Section 3 Fax Operation (Various Functions)
Sending the Same Documents to Multiple Destinations (Broadcast Transmission)
Broadcast Transmission allows the same documents to be transmitted to a number of destinations one after another, in a single operation. If, for example, you want to transmit the same documents from a central office to multiple branch offices, this function is quite convenient as it only requires you to perform the transmission operation one time.
The documents you want to transmit are first entered in memory, and dialing and transmitting operations are repeated automatically for each destination.
* If you enter all of the destination numbers using abbreviated numbers,
* You can also perform Broadcast Transmission as
* During a Broadcast Transmission to multiple destinations, documents will be transmitted using the Memory Transmission mode even if the fax is currently in the Direct Feed Transmission mode.
* If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1 | Set the documents you want to transmit in the Document |
Processor or on the platen. |
* When the documents are set on the platen, it is necessary, after each page is scanned, to select whether or not you want to transmit more pages and to select the size of each page.
(Refer to page
2 | Enter a destination fax number. |
* You can enter the fax number(s) using the keypad, |
abbreviated numbers,
> Entering the fax number with the keypad...
If you want to enter more than one destination fax number, press the “Next des” [“N dest.”] key after you enter the first fax number and you will be able to enter the next number.
(inch)
(metric)
*If you want to enter the next number with one of the
