Section 9 Network FAX Settings (Option)
18 | Use the keypad to enter the currently registered |
administrator number (4 digits). |
* The factory default administration number is “3000” (for 30 sheets/min. copiers), “4000” (for 40 sheets /min. copiers) and “5000” (for 50 sheets /min. copiers).
* The Administrator Number input screen will not be displayed if Restricted Access is turned ON.
19 | Enter the password using the English alphabet, numerals |
or other available symbols. (Maximum 31 digits) |
* Refer to “Entering Characters” on page
(inch)
(metric)
20 | Once you are finished entering the password, press the |
“End” key. The message display will return to the same |
screen as was displayed in step 11.
21 | Press the “Close” key. The message display will return to |
the same screen as was displayed in step 3. |
zRegistering the save folder number (factory default setting: “RX001” and “TX001”)
22 | Press the “Saving Folder No.” [“No.of save folder”] key. | |
|
| (inch) |
|
|
|
|
|
|
(metric)
23 | Use the keypad to enter the save folder number in which |
documents which have been received using the Network |
FAX functions will be saved. (inch)
(metric)
*“Clear” key: Press this key when you want to reenter the number.
“Stop” key: Press this key when you want to cancel the registration procedure and return the touch panel to the screen in step 3.
