Section 5 Other Features of this Fax
Modifying or Deleting Permit IDs
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1Perform steps 1 through 3 of “Registering New Permit IDs” on page
2Press the key which displays the Permit ID you want to modify or delete.
(inch)
(metric)
3 | If you want to delete the registered Permit ID, press the |
“Delete” key and then go to the next step. If you want to |
modify the registered information, press the “Change contents” key and then go directly to step 5.
(inch)
(metric)
> Modifying information
5 | Press the Stop/Clear key to delete the old number and |
then enter the new Permit ID, or use the “” and/or “” |
keys to move the cursor to a desired location and reenter the number as desired.
(inch)
(metric)
6 | Press the “Confirm” key. |
The message display will return to the same screen as |
was displayed in step 2. Once you are finished modifying and/or deleting Permit IDs, press the Reset key.
> Deleting a Permit ID
4 | Press the “Yes” key. |
The message display will return to the same screen as |
was displayed in step 2. If you are finished deleting Permit IDs, press the Reset key.
