Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
> Checking the status of a fax communication in progress
Press the “Status” [“Act status”] key in the bottom right of the touch panel. The document number and information related to the other party will be displayed. (NOTE: It is possible to cancel that ongoing communication by pressing the “Stop” key.)
(inch)
(metric)
* Press the “Close” key to return to the previous screen.
> Checking the status of a print out in progress
Press the “Status” [“Act status”] key in the bottom right of the touch panel.
(inch)
(metric)
* Press the “Close” key to return to the previous screen.
<When the Dual Access function is not available>
There are cases in which the Dual Access function is not available. For example, during a fax communication to one party, you will not be able to receive a fax from another party, nor can you perform setting or registration procedures during any fax transmission or reception.
In such cases, perform the desired operation after the current communication is completed.
Refer to “z Table of Operations Available/ Unavailable under Dual Access”, for more detailed information regarding which operations can and cannot be performed simultaneously.
*Communications that use the timer will not be accomplished, even upon reaching the designated time for the communication to begin, until the current operation has been completed.
zTable of Operations Available/ Unavailable under Dual Access
