10-8

Section 10 Reference Information

CODE	CAUSE AND/OR PROCEDURE FOR CORRECTION

U01600	A communication error occurred during reception at high transmission speed. Perform reception procedures again
	after having the transmitting party lower the transmission speed.

U01700	A communication error occurred during transmission at high transmission speed. Perform transmission
U01720	procedures again.

U01721	A communication error occurred during transmission at high transmission speed. The destination party’s FAX
	may not have the corresponding high speed reception capabilities. If the destination party’s FAX number was
	dialed using an abbreviated number or one-touch key, change the transmission speed registered for that number
	to a lower setting and perform transmission procedures again.

U01800 - U01820	A communication error occurred during reception at high transmission speed. Perform reception procedures again
	after having the transmitting party lower the transmission speed.

U01821	A communication error occurred during reception at high transmission speed. Your unit may not have the
	corresponding high speed reception capabilities. Perform reception procedures again after having the
	transmitting party lower the transmission speed.

U02200	An F-Code Based Relay Broadcast Transmission command was received, but transmission to the remaining final
	destination(s) was impossible because the destination FAX phone number(s) that was(were) registered for the
	corresponding F-Code Relay Box in your FAX machine has(have) been deleted. Check the information registered
	in your FAX and have the initial transmitting station perform the transmission operation again.

U02400	An F-Code Based Relay Broadcast Transmission command was received, but was unsuccessful because the
	F-Code Relay Box ID that the initial transmitting station entered did not match the one registered in your FAX.
	Check the information registered in your FAX and have the initial transmitting station perform the transmission
	operation again.

U03000	Polling Reception was attempted, but was unsuccessful because no documents had been placed in advance in the
	transmitting party’s FAX. Check with the transmitting party.

U03200	The transmitting party’s FAX is one of our models and an F-Code Based Bulletin Board Reception was attempted
	in order to receive documents from that party’s F-Code Box, but was unsuccessful because there were no
	documents stored in the corresponding F-Code Box.

U03300	An error has occurred due to one of the following reasons. Check with the other party.
	(1) A Polling Reception was attempted in order to receive documents from the other party’s FAX, but was
	unsuccessful because Password Check Communication was turned ON in the other party’s FAX and the
	necessary password did not match.
	(2) The transmitting party’s FAX is one of our models and an F-Code Based Bulletin Board Reception was
	attempted in order to receive documents from that party’s F-Code Box, but was unsuccessful because Password
	Check Communication was turned ON in the other party’s FAX and the necessary password did not match.

U03400	Polling Reception was attempted, but was unsuccessful because the password input in the transmitting party’s
	FAX and the self-station ID of the receiving party did not match. Check with the other party.

U03500	The transmitting party’s FAX is one of our models and an F-Code Based Bulletin Board Reception was attempted
	in order to receive documents from that party’s F-Code Box, but was unsuccessful because the F-Code Box number
	that you entered was not registered in the other party’s FAX.

Xerox FAX System (J) manual 10-8

Models: FAX System (J)

CODE