Section 7 Various Settings and Registration
Registering the Remote Test ID (Remote Test ID setting)
If you have entered into a contract with an authorized service center for their Remote Diagnosis service, it is necessary to register here in advance the Remote Test ID that they designate for you.
*A previously registered Remote Test ID can also be modified by performing the following procedure.
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1 | Press the “Register” key. The Registration Select screen |
will appear. | |
|
|
(inch)
3 | Use the keypad to enter the designated |
Test ID. |
* If you want to revise the entered number, press the “” or “” cursor key to move the cursor to the number that you want to change.
(inch)
(metric)
(metric)
2 | Press the “Remote Test ID” key. |
| (inch) |
4 | Press the “Confirm” key. The message display will return |
to the same screen as was displayed in step 2. If you are |
finished making settings, press the Reset key to return to the initial mode.
