Section 5 Other Features of this Fax
Modifying or Deleting Encryption Boxes
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1Perform steps 1 through 3 of “Registering New Encryption Boxes” on page
2Press the key which displays the box number for the Encryption Box you want to modify or delete.
(inch)
(metric)
3 | Enter the Box ID | |
|
| (inch) |
|
|
|
|
|
|
(metric)
4 | Press the “Confirm” key. |
|
|
5 | If you want to delete the registered Encryption Box, press |
the “Delete” key and then go to the next step. If you want |
to modify the registered information, press the “Change contents” key and then go directly to step 7.
(inch)
(metric)
> Deleting an Encryption Box
6 | Press the “Yes” key. |
The message display will return to the same screen as |
was displayed in step 2. Once you are finished modifying and/or deleting Encryption Boxes, press the Reset key.
> Modifying registered information
7 | The currently registered information will be displayed. |
Refer to “Registering New Encryption Boxes” in order to |
modify that information.
8 | Press the “Confirm” key. |
The message display will return to the same screen as |
was displayed in step 2. Once you are finished modifying and/or deleting Encryption Boxes, press the Reset key.
