Xerox FAX System (J) manual Inch Metric

Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)

		(13)
Inch				(8)
				(9)
				(10)
				(11)
			(12)
		(13)
Metric			(8)
			(9)
			(10)
			(11)
			(12)
(8)	“Dest. check” key	Press this key when you have entered multiple destination fax numbers using speed-dial keys, etc., and
		you want to check the list of those numbers.
(9)	“Re-dial” key	Press this key when you want to have the fax automatically redial the most recently dialed number.
(10) “On-hook” key		When a separately purchased telephone is connected to this fax machine and you press this key, you can
		dial a destination number without having to pick up the receiver.
(11) “Memory TX” / “Dir. Feed		When you want to switch between the Memory Transmission mode (“Memory Tx”) and the Direct Feed
	Tx” key	Transmission mode (“Dir. Feed Tx”). The mode will change each time you press this key.
(12) Reception mode select		Press this key when you want to select a different reception mode. The display will change to the
	key	reception mode selection screen where you can select the desired reception mode by pressing the “Auto
		RX”, “Manual RX” or “Answering Machine” key, as appropriate.
(13) Memory bar		Indicates the amount of data stored in memory. As documents are being stored, the bar will move
		towards “100%” indicating that the data stored in memory is increasing. Once it reaches “100%”, no more
		documents can be stored in memory.

1-4