Xerox FAX System (J) What is the Administrator Number Used For?, When You Press the Reset Key

Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)

What is the Administrator Number Used For?

In order to manage each individual's or each department's use of this fax in the Fax Operation mode – and enhance security during Encrypted Communication as well – it is necessary to enter the registered administrator number in those cases noted in (1) and (2) below.

As you can only register one administrator number, it is recommended that the person-in-charge of managing use of this fax be the one to register that number.

*The factory default administrator number is The factory default administration number is “3000” (for 30 sheets/min. copiers), “4000” (for 40 sheets /min. copiers) and “5000” (for 50 sheets /min. copiers).

(1)You must enter the administrator number when...

•turning Restricted Access ON and OFF.

•registering ID-codes.

•registering Encryption Keys.

•printing out the Encryption Key List.

•registering the SMTP authorization password (Registering the Network FAX information)

(2)If Restricted Access is turned ON, you must enter the administrator number when...

•printing out any report or list other than the Activity Report.

•performing any setting or registration procedure.

NOTE

It is suggested that you make some sort of note of the new administrator number after changing it. If, for any reason, you lose reference to the number, you will not be able to access to the various setting, registration, modification and deletion procedures of this fax.

Using a 3-digit Document Number to Manage Fax Communications (Document Number)

The fax uses a 3-digit document number in order to manage each fax communication. This document number is assigned during each procedure and in the order that each communication that uses the timer, as well as each transmission or reception, is accomplished. The actual timing of the determination of each document number will differ depending upon the operation being carried out.

In addition to appearing in the message display, this document number can be verified by checking the Transaction Result display, the Delayed Communication Report that is printed out for each communication that uses the timer or by printing out a Confirmation Report. (Refer to “Checking the Result of Transmissions” on page 6-1, “Printing Out a Confirmation Report” on page 6-5,and “Turning Print Out of Each Report ON/OFF (Print Report setting)” on page 7-1.)

(inch)

(metric)

When You Press the Reset Key...

When you want to cancel a procedure part way through, simply press the Reset key. The touch panel will automatically return to the initial mode for fax operation.

*If, however, documents have already been set when you press the Reset key, the displayed size of those documents will remain in the message display.

*Depending on the status of the operation, there are occasions when pressing the Reset key may have no effect.

Automatically Clearing the Current Settings (Auto Clear function)

The Auto Clear function will clear all entered settings and the touch panel will return to the initial mode settings after any type of transmission or print out, or if you do not press any keys within 90 seconds during any procedure.

*If, however, documents are set when the Auto Clear function engages, the displayed size of those documents will remain in the message display.

Automatically Engaging the Energy Saving Mode (Auto Shut-Off function)

Anytime there is no operation of or activity with this fax (no keys are pressed, no documents are set, nothing is printed out, etc.) for a designated period of time, the Auto Shut-Off function will engage for energy saving purposes and the fixing section heater and fan inside the machine will shut down.

The amount of time most copy or fax machines spend waiting for some operation to begin is generally greater than the time actually spent on copying or fax communication. Thus, the energy consumed during that time is a great percentage of the overall energy used by the machine. Shutting down the fixing section heater and fan enables energy and cost reductions by minimizing unnecessary energy consumption while the machine is in this waiting state.

*It is possible to change the amount of time that will elapse before the Auto Shut-Off function is to engage (factory default: 60 minutes). It is recommended that this be set to a longer period of time if the machine is used frequently during the day, and to a shorter time if there are normally long periods between use. (Refer the Operation Guide for your copier.)

1-12