Section 5 Other Features of this Fax
Modifying or Deleting Encryption Keys
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1Perform steps 1 through 3 of “Registering New Encryption Keys” on page
2Press the key which displays the Encryption Key you want to modify or delete.
3If you want to delete the registered Encryption Key, press the “Delete” key and then go to the next step. If you want to modify the registered information, press the “Change contents” key and then go directly to step 5.
(inch)
(metric)
> Modifying information
5 | Press the Stop/Clear key to delete the old key and then |
enter the new Encryption Key, or use the “” and/or “” |
keys to move the cursor to a desired location and reenter the Encryption Key as desired.
(inch)
(metric)
6 | Press the “OK” key. |
The message display will return to the same screen as |
was displayed in step 2. Once you are finished modifying and/or deleting Encryption Keys, press the Reset key.
> Deleting an Encryption Key
4 | Press the “Yes” key. |
The message display will return to the same screen as |
was displayed in step 2. If you are finished deleting Encryption Keys, press the Reset key.
