Section 3 Fax Operation (Various Functions)
4 | Press the “Chain” key. | |
|
| (inch) |
|
|
|
|
|
|
(metric)
8 | Check the registered information. If you want to change |
any portion of it, press the key that corresponds to the |
desired item and change the information as desired. (inch)
(metric)
5 | Use the keypad to enter the desired chain dial number. |
(Maximum 32 digits) |
(inch)
(metric)
* “” and “” cursor keys...Use to move the cursor.
| “Delete” key...Press to delete the character that the |
| cursor is currently under. (When the cursor is at the |
| last space, the previous character will be deleted.) |
| “Space” key...Press to enter a space. |
| “Pause” key...Press to enter a slight pause (indicated by |
| a hyphen) at that point in dialing. |
6 | Press the “Next” key. |
|
|
7 | Enter the desired name for the chain dial key. (Maximum |
20 characters) |
* In order to enter characters, refer to “Entering Characters” on page
9 | To register this chain dial key with the entered |
information as is, press the “OK” key. |
The message display will return to the same screen as was displayed in step 3.
If you want to continue registering other
10 | If you are finished making settings, press the Reset key to |
return to the initial mode. |
