![](/images/new-backgrounds/1158557/158557133x1.webp)
Section 3 Fax Operation (Various Functions)
8 | Press the “Close” key. |
|
|
9 | Once you are finished modifying all of the items that you |
want, press the “OK” key. |
The message display will return to the same screen as was displayed in step 3.
If you want to continue modifying other chain dial keys, repeat steps 3 through 9.
If you are finished making settings, press the Reset key to return to the initial mode.
Dialing With a Chain Dial Key
*If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1If the operation involves the transmission of documents, set the documents you want to transmit.
2 | Press the desired |
chain dial key. |
(inch)
(metric)
3 Enter the other party’s fax number.
* You can enter the fax number using the keypad, abbreviated numbers,
* Once the other party’s fax number is entered, only the registered chain dial name will be displayed, followed by the other party’s fax number or name.
* If you want to enter the fax number once again from the beginning during input with the keypad, simply press the Stop/Clear key.
4 | Press the Start key. The communication operation will |
begin automatically. |