![](/images/new-backgrounds/1158557/158557109x1.webp)
Section 3 Fax Operation (Various Functions)
Sending 2-Sided Documents (Duplex Transmission)
Duplex Transmission enables the transmission of both the front and back sides of duplex
During the
It is also possible to use Duplex Transmission capabilities in combination with each of the other various types of fax communication available in this fax. The following method explains the procedure for sending duplex documents to a single destination.
* Prior to performing Duplex Transmission, you must select “Standard size” when setting the document size for scanning from the Document Processor. (Refer to “Setting the Document Size for Scanning from the Document Processor (Scan from DP setting)” on page
* If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1 | Set the | ||
Processor. | |||
|
|
|
|
|
|
|
|
|
|
|
|
2 Enter the destination fax number.
* If you entered the fax number using the keypad, go to the next step.
If you entered the fax number using abbreviated numbers,
(inch)
(metric)
3 | Press the “Duplex TX” key and then go directly to step 6. |
|
|