Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
<Table codes>
The numbers and symbols shown in the table above refer to the following:
*: During procedures that use the message display but are not included in the initial procedures listed in the table above, the procedure will work just like this operation.
O:The additional operation will work unconditionally with the initial operation.
X: The additional operation will NOT work with the initial operation.
U: The additional operation will work with the initial operation under certain conditions. The adjoining numerals refer to the following conditions:
1:Print out will be accomplished once printing is possible and the fax is in the Fax Operation mode.
2:Direct Reception will switch to Memory Reception and print out will be accomplished once printing is possible and the fax is in the Fax Operation mode.
3:Printing can be stopped and copies made.
4:Settings made in the Fax Operation mode will be deleted once the machine is switched to the Copy Operation mode.
5:It is possible to add fax default settings, but those communication settings, etc., that have already been made will be canceled.
6:Cannot be used with TWAIN. Scan to PC and
7:Cannot be used with TWAIN. Scan to PC and
