Section 10 Reference Information

 

 

 

 

CODE

CAUSE AND/OR PROCEDURE FOR CORRECTION

 

 

U03600

The transmitting party’s FAX is one of our models and an F-Code Based Bulletin Board Reception was attempted

 

in order to receive documents from that party’s F-Code Box, but was unsuccessful because the F-Code password

 

that you entered did not match the one registered in the transmitting party’s FAX.

 

 

U03700

An F-Code Based Bulletin Board Reception was attempted in order to receive documents from the other party, but

 

was unsuccessful because the other party’s FAX does not have F-Code Based Bulletin Board Transmission

 

capabilities or because there were no documents stored in the corresponding box.

 

 

U04000

The destination FAX is one of our models and an F-Code Based Confidential Transmission was attempted in order

 

to transmit documents to that party’s F-Code Box, but was unsuccessful because the F-Code Box number that you

 

entered was not registered in the destination party’s FAX.

 

 

U04100

A transmission to a destination party’s box (ex. F-Code Box) was attempted, but was unsuccessful because the

 

destination party’s FAX does not have F-Code Based Confidential Reception capabilities.

 

 

U04200

Encryption Transmission was attempted, but was unsuccessful because the Encryption Box was not registered in

 

the other party’s FAX.

 

 

U04300

Encryption Transmission was attempted, but was unsuccessful because the other party’s FAX does not possess

 

Encryption Communication capabilities.

 

 

U04400

Encryption Transmission was attempted, but was unsuccessful because the Encryption Keys did not match.

 

 

U04401

Encryption Transmission was attempted, but the other party was not dialed because the designated Encryption

 

Key is not registered in your unit.

 

 

U04500

Encryption Reception was attempted, but was unsuccessful because the Encryption Keys did not match.

 

 

U05100

Transmission was attempted, but was unsuccessful because Password Check Communication was turned ON in

 

your unit and the necessary password did not match. Check with the destination party.

 

 

U05200

A transmission was attempted by the other party, but was unsuccessful because Password Check Communication

 

was turned ON in your unit and the necessary password did not match.

 

 

U05300

Transmission was attempted, but was unsuccessful because Password Check Communication was turned ON in

 

the destination party’s FAX and the necessary password did not match. Check with the destination party.

 

 

U09000

Communication was attempted but, but was unsuccessful because the other party’s FAX does not match the

 

communication protocol in use (the other party is using a G2 facsimile).

 

 

U12000

An F-Code Based Relay Broadcast Transmission command was received, but all the data to be transmitted was

 

not received because the memory in your FAX machine has become full. Check the contents of your machine’s

 

memory and, after you have created sufficient space in memory, have the initial transmitting station perform the

 

transmission operation again.

 

 

10-9

Page 193
Image 193
Xerox FAX System (J) manual 10-9