Lantronix EDS16PR, EDS32PR manual Tunnel Modem Emulation, Tunnel Packing Description Mode Settings

	7: Network, Line, Tunnel, and Terminal Settings
Tunnel – Packing Mode Page
Tunnel – Packing	Description
Mode Page
Settings
Mode	Select the method used to pack data. Choices are:
	Disabled = default packing algorithm. (default)
	Timeout = data is sent after the timeout elapses.
	Send Character = data is sent when the send character is read on
	the serial line.
Timeout	Enter the maximum number of milliseconds to wait before sending
	queued data across the network. Default is 1000 milliseconds.
Threshold	Enter the queued data limit that, when reached, immediately sends
	queued data to the network. Default is 512 bytes.
Send Character	Enter the send character. When this character is read on the serial
	line, it forces the queued data to be sent immediately. Default is
	<none>.
Trailing Character	Enter the trailing character. This character is inserted into the
	outgoing data stream immediately after the send character. Default is
	<none>.

Tunnel – Modem Emulation Page

A tunnel in connect mode can be initiated using modem commands incoming from the serial line. If you click Modem Emulation at the top of one of the Tunnel pages, the Tunnel – Modem Emulation page displays. Here you can select modem emulation settings for the tunnel selected at the top of the page. For more information about modem emulation, see Modem Emulation on page 164.Tunnel – Modem Emulation Page

EDS Device Servers User Guide 69