Lantronix Comprehensive SNMP Configuration Guide for EDS Device Servers

	8: Services Settings
	SNMP Page
SNMP Page Settings	Description
SNMP Agent	Select whether SNMP is enabled. Choices are:
	On = SNMP is enabled. (default)
	Off = SNMP is disabled.
Read Community	Enter the case-sensitive community name from which the
	EDS will receive trap messages. Default is public. For
	security, the read community name displays as <Configured>
	to show that one is enabled.
Write Community	Enter the case-sensitive community name to which the EDS
	will send trap messages. Default is private. For security, the
	write community name displays as <Configured> to show that
	one is enabled.
System Contact	Enter the name of the system contact. No contact is
	configured by default.
System Name	Enter the EDS’s name.
System Description	Enter a system description for the EDS.
System Location	Enter the geographic location of the EDS. No location is
	configured by default.
Enable Traps	Select whether SNMP cold start trap messages are enabled
	at boot. Choices are:
	On = SNMP cold start trap messages are enabled at boot
	time. (default)
	Off = SNMP traps are disabled.
Primary TrapDest IP	Enter the primary SNMP trap host. None set by default.
Secondary TrapDest IP	Enter the secondary SNMP trap host. None set by default.

EDS Device Servers User Guide 78