Lantronix EDS16PR, EDS32PR Physically Installing the EDS8/16/32PR, Connecting the EDS8/16/32PR

	4: Installation: EDS8PR, EDS16PR and EDS32PR
LED	Description
Power (green)	On = EDS is receiving power.
Status (yellow)	Fast blink = initial startup (loading OS).
	Slow blink (once per second) = operating system startup.
	On = unit has finished booting.
Speed (yellow)	On = EDS is connected to a 100 Mbps Fast Ethernet network.
	Off = EDS is connected to a 10 Mbps Ethernet network.
Activity (green)	Blink = EDS is sending data to or receiving data from the Ethernet
	network.

Reset Button

The reset button is on the back of the EDS8/16/32PR, to the left of the power connector. Pressing this button for 2-to-3 seconds reboots the EDS8/16/32PR and terminates all data activity occurring on the serial and Ethernet ports.

Physically Installing the EDS8/16/32PR

Finding a Suitable Location

‹You can install the EDS8/16/32PR either in an EIA-standard 19-inch rack (1U tall) or as a desktop unit.

‹If using AC power, avoid outlets controlled by a wall switch.

Connecting the EDS8/16/32PR

All serial ports support RS-232 devices.

To connect the EDS8/16/32PR to one or more serial devices, use the following procedure:

Note: We recommend you power off the serial devices that will be connected to the EDS8/16/32PR.

1.For each serial device you want to connect, attach a CAT 5 serial cable between the EDS8/16/32PR and your serial device. For a list of cables and adapters you can use with the EDS8/16/32PR, see E: Lantronix Cables and Adapters.

2.Connect an Ethernet cable between the EDS8/16/32PR Ethernet port and your Ethernet network.

3.Insert the supplied power cord into the power connector on the back of the EDS8/16/32PR. Plug the other end into an AC wall outlet. After power-up, the self- test begins.

4.Power up all connected serial devices.

EDS Device Servers User Guide 29