Lantronix EDS8PR, EDS32PR, EDS16PR Factory Default Configuration, Network Configuration Settings

A: Factory Default Configuration

This appendix lists the EDS factory-default configuration. The types of settings are in alphabetical order.

Network Configuration Settings

	Network Configuration	Network Configuration Settings
	Parameters
	BOOTP Client	Off (disabled)
	DHCP Client	On (enabled)
	IP Address	0.0.0.0 (auto-IP if DHCP fails)
	Network Mask	0.0.0.0 (auto if DHCP fails)
	Gateway	0.0.0.0
	MAC Address	Specified by manufacturer
	Hostname	None
	Domain	None
	DHCP Client ID	None
	Ethernet	Auto speed, auto duplex
Serial Port Line Settings

	Serial Port Line	Serial Port Line Settings
	Parameters
	Status	Enabled
	Protocol	Tunnel
	Baud Rate	9600 baud
	Parity	None
	Data Bits	8
			143
EDS Device Servers User Guide