Lantronix EDS16PR, EDS32PR, EDS4100, EDS8PR manual Tunnel Accept Mode

7: Network, Line, Tunnel, and Terminal Settings

Tunnel – Accept Mode Page

Accept Mode determines how the EDS “listens” for an incoming connection. If you click Accept Mode at the top of one of the Tunnel pages, the Tunnel – Accept Mode page displays. Here you can select the method for starting a tunnel in Accept mode and select other settings for the tunnel selected at the top of the page.

Under Current Configuration, Local Port has a Reset link if it has been changed from the default. If you click this link, a message tells you that your action may stop an active connection. Click OK to proceed or Cancel to cancel the operation.

For more information about Accept mode, see Accept Mode on page 163.

Figure 7-8. Tunnel – Accept Mode Page

EDS Device Servers User Guide 61