7: Network, Line, Tunnel, and Terminal Settings
EDS Device Servers User Guide 73
Terminal Page
Settings
Description
Exit Connect
Menu
Select whether to display a choice for the user to exit the Login
Connect Menu and reach the CLI. Choices are:
Enabled = a choice allows the user to exit to the CLI.
Disabled = there is no exit to the CLI.
Send Break Enter a Send Break control character, e.g., <control> Y, or blank to
disable.
When the Send Break control character is received from the
network on its way to the serial line, it is not sent to the line;
instead, the line output is forced to be inactive (the break condition).
Break Duration Enter how long the break should last in milliseconds.
Host Page Clicking the Host link in the menu bar displays the Host page. This page displays current
settings for a remote host and lets you change these settings.
To select a host:
EDS4100: Click Host 1, Host 2, Host 3, or Host 4 at the top of the page.
EDS8/16/32PR: Select the tunnel from the Select Host drop-down list at the top of the
page.