Lantronix EDS8PR, EDS32PR, EDS16PR, EDS4100 manual Line Command Mode

	7: Network, Line, Tunnel, and Terminal Settings
Line –	Description
Configuration
Page Settings
Xon char	Character to use to initiate a flow of data.
	When Flow Control is set to Software, specify Xon char. Prefix
	a decimal character with \ or a hexadecimal character with 0x, or
	provide a single printable character. The default Xon char is
	0x11.
Xoff char	When Flow Control is set to Software, specify Xoff char. Prefix
	a decimal character with \ or a hexadecimal character with 0x, or
	provide a single printable character. The default Xoff char is
	0x13.

Line – Command Mode Page

If you click Command Mode at the top of one of the Line Settings pages, the Line –

Command Mode page displays. This page shows the command mode settings for the serial line selected at the top of the page and lets you change the settings for that serial line.

Figure 7-4. Line – Command Mode Page

EDS Device Servers User Guide 55