Lantronix EDS8PR, EDS32PR, EDS16PR, EDS4100 manual Terminal Network Login Connect Menu = Enabled

7: Network, Line, Tunnel, and Terminal Settings

Login Connect Menu

An administrator can set up a menu on the EDS for terminal users.

For a terminal attached to serial Line N, set as follows:

Line[N] Protocol = None

Line[N] Command Mode = Always

Terminal[Line N] Login Connect Menu = Enabled.

For Telnet-attached terminals, set:

Terminal [Network] Login Connect Menu = Enabled.

The terminal user will see a menu roughly like this:

Password :

Connection menu: (select by number)

1) Alpha 2) Beta

3)Exit to command line interface 4) Log out Selection =

The administrator adds destination serial line M to the menu by filling in Line[M] Name. For this purpose, set:

Line[M] Protocol = None

Line[M] Command Mode = Disabled.

The administrator adds a network destination to the menu by setting up a Host entry for it. Each named Host entry will appear in the menu.

The administrator adds the Exit to command line interface choice to the menu by setting:

Terminal[Line N] or Terminal[Network] Exit Connect Menu = Enabled.

The Log out choice is always present.

EDS Device Servers User Guide 75