7: Network, Line, Tunnel, and Terminal Settings
EDS Device Servers User Guide 72
Clicking the Terminal link in the menu bar displays the Terminal page. This page
displays configuration settings for the terminal on a serial line and lets you change them
as necessary.
To select a terminal:
From the drop-down list at the top of the page, select the line that is connected to the
terminal you want to configure.
Figure 7-13. Terminal Page
Terminal Page
Terminal Page
Settings
Description
Terminal Type Enter text to describe the type of terminal. The text will be sent to a
host via IAC.
Note: IAC means “interpret as command.” It is a way to send
commands over the network such as send break or start
echoing.
Login Connect
Menu
Select the interface to display when the user logs in. Choices are:
Enabled = displays the Login Connect Menu.
Disabled = displays the CLI