Lantronix EDS8PR, EDS32PR Tunnel Description Disconnect Mode Settings, Tunnel Disconnect Mode

7: Network, Line, Tunnel, and Terminal Settings

Figure 7-10. Tunnel – Disconnect Mode Page

	Tunnel – Disconnect Mode Page
Tunnel –	Description
Disconnect
Mode Page
Settings
Character	If enabled, an active connection is disconnected when the specified stop
Stop	character is read on the serial line.
Modem	If enabled, an active connection is disconnected when the Modem
Control	Control pin (DSR) is de-asserted on the serial line.
Timeout	Enter the idle time, in milliseconds, that must elapse for a connection
	before it is disconnected. Enter 0 (zero) to disable (default).
Flush Serial	Select whether the serial line should be flushed when a connection is
Data	disconnected. Choices are:
	Enabled = flush the serial line when a connection is disconnected.
	Disabled = do not flush the serial line. (default)

EDS Device Servers User Guide 67