Lantronix EDS8PR manual Line Settings Pages, From DHCP. If it cannot, the EDS uses a network mask

	7: Network, Line, Tunnel, and Terminal Settings
Network	Description
Configuration
Page Settings
Network Mask	Enter the EDS subnet mask. The subnet mask consists of four octets
	separated by a period. Changing this value requires the EDS to be
	rebooted.
	Note: When DHCP is enabled, the EDS tries to obtain a network mask
	from DHCP. If it cannot, the EDS uses a network mask of 255.255.0.0.
Gateway	Enter the router IP address from the local LAN the EDS is on. The
	address consists of four octets separated by a period.
MAC Address	Enter the EDS MAC address. Default is factory set. Changing this value
	may cause unexpected results. Changing this value requires the EDS to
	be rebooted.
Hostname	Enter the EDS host name. The host name can be up to 31 characters
	with no spaces.
Domain	Enter the EDS domain name.
DHCP Client ID	Enter a DHCP ID if used by the DHCP server. Changing this value
	requires the EDS to be rebooted.
Ethernet Link	Select the Ethernet link speed. Default is Auto.

Line Settings Pages

The Line Settings page displays the status and statistics for each of the serial lines (ports). This page also lets you change the character format and command mode settings for the serial lines.

To select a line:

EDS4100: Click Line 1, Line 2, Line 3, or Line 4 at the top of the page.

EDS8/16/32PR: Select the line from the Select Line drop-down list at the top of the page.

After you select a serial line, you can click Statistics, Configuration, or Command Mode to view and change the settings of the selected serial line. Because all serial lines operate independently, you can specify different configuration settings for each line.

EDS Device Servers User Guide 51