Lantronix EDS4100, EDS32PR, EDS16PR, EDS8PR manual Tunnel Disconnect Mode

	7: Network, Line, Tunnel, and Terminal Settings
Tunnel – Connect	Description
Mode Page
Settings
Block Serial Data	Select whether incoming block serial data should be discarded. This
	setting is used for debugging purposes. Choices are:
	On = discard all incoming serial data on the respective interface.
	Off = do not discard all incoming serial data. (default)
Block Network Data	Select whether incoming block network data should be discarded.
	This setting is used for debugging purposes. Choices are:
	On = discard all incoming network data on the respective interface.
	Off = do not discard all incoming network data. (default)
TCP Keep Alive	Specifies the number of milliseconds the EDS waits during an inactive
	connection before checking the status of the connection. If the EDS
	does not receive a response from the remote host, it drops that
	connection.
Email on Connect	Select whether email should be sent when a connection is made.
	None = no email should be sent.
	Email # = send an email corresponding to the tunnel number.
Email on Disconnect	Select whether email should be sent when a connection is closed.
	None = do not send an email
	Email # = send an email corresponding to the tunnel number.

Tunnel – Disconnect Mode Page

If you click Disconnect Mode at the top of one of the Tunnel pages, the Tunnel – Disconnect Mode page displays. Here you can select the disconnect method for the tunnel selected at the top of the page. For more information about Disconnect mode, see Disconnect Mode on page 163.

EDS Device Servers User Guide 66