4: Installation: EDS8PR, EDS16PR and EDS32PR

‹Product ID (name)

‹Product description

‹Hardware address (also referred to as Ethernet or MAC address)

‹Agency certifications

Serial Ports

The EDS8PR has 8 serial ports, the EDS16PR has 16 serial ports, and the EDS32PR has 32 serial ports. All serial ports are configured as DTE and support baud rates up to 230,400 baud.

Figure 4-3. RJ45 Serial Port

Ethernet Port

The back panel of the EDS8/16/32PR provides an RJ45 Ethernet port. This port can connect to an Ethernet (10 Mbps) or Fast Ethernet (100 Mbps) network. The Speed LED on the back of the EDS8/16/32PR shows the connection of the attached Ethernet network. The EDS8/16/32PR can be configured to operate at a fixed Ethernet speed and duplex mode (half- or full-duplex) or auto-negotiate the connection to the Ethernet network.

LEDs

Light-emitting diodes (LEDs) on the front and back panels show status information.

‹Back panel. Each serial port has a Transmit and a Receive LED. The Ethernet connector has a Speed and an Activity LEDs. In addition, the back panel has a Power LED and a Status LED.

‹Front panel. The front panel has a green Power LED.

The table below describes the LEDs on the back of the EDS.

 

Back Panel LEDs

 

 

LED

Description

Transmit (green)

Blinking = EDS is transmitting data on the serial port.

 

 

Receive (yellow)

Blinking = EDS is receiving data on the serial port.

 

 

EDS Device Servers User Guide

28

Page 28
Image 28
Lantronix EDS32PR, EDS16PR, EDS4100, EDS8PR manual RJ45 Serial Port