D-Link DCM-201 manual To configure TCP/IP on your Windows XP and Windows 2000 PC

Page 11

Configuring TCP/IP on Windows 95, Windows 98, and Windows Me continued

2 Look for an entry named TCP/IP. If you see TCP/IP listed next to your Ethernet hardware device, you can now go to the section “Connecting the Cable Modem”. However, if TCP/IP is not listed, you must complete the following steps.

aClick Add.

bClick Protocol and click Add.

cClick Microsoft in the Manufacturers list and Click TCP/IP in the Network Protocols list.

dClick OK.

eClick Yes when prompted to restart your computer.

You can now connect the cable modem. See “Connecting the Cable Modem” for the instructions.

Configuring TCP/IP on the Windows XP or Windows 2000 Operating Systems

To configure TCP/IP on your Windows XP and Windows 2000 PC:

1 Right-click the My Network Places icon and select Properties.

2 Right-click Local Area Connection and click Properties. Look for an entry named TCP/IP. If you see TCP/IP listed next to your Ethernet hardware device, you can now go to the section “Connecting the Cable Modem.” However, if TCP/IP is not listed, you must complete the following steps.

a Scroll to the Internet Protocol TCP/IP option.

b Click to place a check mark in the Internet Protocol check box c Click OK.

d You can now connect the cable modem. See the section “Connecting the Cable Modem” for the instructions.

11

Image 11
Contents Link DCM-201 Contents Package Contents System Requirements for Configuration Serial Number S/N RF and ETH MAC Local Cable Network ServicePrepare Your Workspace for the Cable Modem Installation Before installing the modemPrepare Your Workspace for the Cable Modem Installation Introduction Decide Which Installation Process to Use FeaturesInstalling the Cable Modem Using the Ethernet Port Verify the TCP/IP Protocol Configuration To configure TCP/IP on your Windows XP and Windows 2000 PC To configure TCP/IP on a Macintosh Configuring TCP/IP on a Macintosh ComputerTo configure TCP/IP on your Windows NT 4.0 PC Problem I cannot access my e-mail or Internet service Connecting the Cable ModemTroubleshooting the Ethernet Installation Click Properties Page Installing the Cable Modem Using the USB Port To install the hardware Installing the Hardware Cable Modem and Power AdapterInstalling the Software Drivers Windows XP OS Installing the Software DriversInstalling the Software Drivers Windows XP OS Installing the Software Drivers Windows 2000 OS Installing the Software Drivers Windows 2000 OS Click Finish to continue Installing the Software Drivers Windows 2000 OS Installing the Software Drivers Windows Me OS Add New Hardware Wizard screen appears. Click Finish Installing the Software Drivers Windows Me OS Troubleshooting the USB Installation Troubleshooting the USB Installation Page Front Panel LEDs Cable Modem Front and Rear PanelsStatus PowerWhat the LED Activity Means CablePower Back Panel ConnectorsTechnical Specifications Link Technical Support over the Internet Contacting Technical SupportLink Technical Support over the Telephone 877 Warranty and Registration Page 01/21/2003