Local Cable Network Service
Before installing the modem:
1Read this entire User’s Manual from front to back in sequence.
2Find the Serial Number, RF and Ethernet address located on a sticker on the cable modem and write them here:
Serial Number S/N: ____________________
RF and ETH MAC: ____________________
USB MAC: | ____________________ |
3Contact your local cable service operator for Internet/cable network access.Your local cable operator will check for cable access availability in your area, install a cable line (if necessary), provide you with an access account, set up configuration and verify other technical details.
4Ask your local cable service provider about adding additional IP addresses to your account. See “ Which Installation to Use?” for more information.
Prepare Your Workspace for the Cable Modem Installation
Before installing the cable modem, you should prepare your workspace. You can install the cable modem vertically with the included bracket, or install the cable modem horizontally.
To prepare your workspace:
1 Position the cable modem so that it is located near the computer and the wall cable outlet. There should be plenty of room to guide the cables away from the cable modem without crimping them.
2 Prepare the cable modem:
nFor vertical installation: Place the cable modem securely in the included stand.
nFor horizontal installation: Use the four included feet to install the cable modem.
5