D-Link DSL-300T user manual Setup Static IP

Page 33

DSL-300T ADSL Modem User’s Guide

4.Leave the default QoS values if you are unsure or the ISP did not provide this information.

5.Do not change the PCR or SCR values unless you are required to do so. If you are told to change these, type in the values given to you by your service provider.

6.The Encapsulation values LLC (SNAP) and VC (MUX) are two different methods of encapsulating the PPP packet. Contact your ISP to make sure which encapsulation is being supported.

7.Click the Apply button when you have entered all the information. The browser window may briefly go blank. After a few seconds the new connection you just configured will become the active connection for the Modem.

8.To make your temporarily saved connection permanent, click the Save All button in the System Commands window on the Tools tab.

Static IP

Static is used whenever a known static IP is assigned. The accompanying information such as the Subnet mask and the gateway should also be specified in order to be able to connect. Up to three Domain Name Server (DNS) addresses can also be specified. These are the servers would enable you to have access to other web servers. Valid IP addresses range from 0.0.0.0 to 255.255.255.255.

Figure 3- 7. Setup Static IP

To configure the WAN connection for Static, perform the steps listed below. Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose.

1.Click the Connection 1 button under WAN Setup to view the default PPPoA Connection Setup configuration menu.

23

Page 32 Page 34
Image 33
Page 32 Page 34
Contents DSL-300T Adsl Modem User’s Manual FCC Warning DSL-300T DSL Modem User’s GuideLimited Warranty HardwareSoftware Table of Contents Status Page Installation Overview About This User’s GuideBefore You Start Information Required for Installation Ethernet NIC Dhcp Client statusObtain an IP address automatically that is, they Page Introduction What is ADSL?Modem Description and Operation Low Pass FiltersWeb Browser Ethernet Port NIC AdapterAdditional Software Modem Features Standards Compatibility and Compliance Packing List Front Panel DisplayRear Panel Connections Hardware Installation Power on ModemFactory Reset Button Connect Adsl Line Network ConnectionsConnect Modem to Ethernet Computer to Modem ConnectionHub or Switch to Modem Connection Configuring the Modem for the First Time Configuring IP Settings on Your ComputerWan Configuration Summary Configure Windows XP for Dhcp DSL-300T Adsl Modem User’s Guide Windows Configure Windows 2000 for DhcpConfigure Windows ME for Dhcp Windows MEWindows 95 and Windows Configure Windows 95 and Windows 98 for Dhcp Configure Windows NT 4.0 for DhcpWindows NT 4.0 Workstations Home Home Status Information window Configure the ModemSetup PPoA Configure a New ConnectionDSL-300T Adsl Modem User’s Guide PPPoE Setup Connection PPPoE windowBridge Setup New Connection Bridge windowStatic IP Setup Static IPDSL-300T Adsl Modem User’s Guide Web-based Management Accessing the Web ManagerSetup Dhcp Configuration window Dhcp ConfigurationManagement IP Setup Management IP windowOpening Tools window Changing the User Name and PasswordTools User Management window User ManagementRestore System CommandsSave All RestartTools Remote Log window Remote LogTools Update Gateway window Update GatewayTools Ping Test window Ping TestTools Modem Test window OAM TestStatus 11. Status Network Statistics window Network Statistics12. Status Connection Status window Connection Status13. Status Dhcp Clients window Dhcp Clients14. Status Modem Status window Modem Status15. Status Product Info. window Product Info16. Status System Log window System LogHelp Technical Specifications EMI Using the Default IP Address IP Address SetupAssigning Network IP Addresses Manual IP Address AssignmentUsing Dhcp IP Setup Example #2Changing the IP Address of the Modem IP Addresses IP ConceptsClass Beginning Address Ending Address IP Network ClassesIP Class Subnet Mask Subnet MaskMicrofilter Installation Microfilters and SplittersMicrofilters Line Splitter Line Splitter InstallationPage Offices Italy Link Mediterraneo Srl/D-Link Italia Link U.S.A Print, type or use block letters Registration Card
Related manuals
Manual 57 pages 34.49 Kb

DSL-300T specifications

The D-Link DSL-300T is a widely recognized ADSL modem/router that caters to the needs of home and small office users. Designed for high-speed internet connectivity, it supports ADSL standards, making it an ideal choice for users seeking reliable broadband access. The modem is compatible with various DSL networks, offering flexibility for users in different regions.

At the heart of the D-Link DSL-300T is its robust ADSL technology, which provides high-speed data transfer rates exceeding 8 Mbps for download and 1 Mbps for upload, depending on the service plan. This allows users to enjoy smooth browsing, video streaming, and online gaming experiences. The device features a built-in ATM (Asynchronous Transfer Mode) module, ensuring efficient data packet transmission across networks.

One of the key features of the DSL-300T is its easy plug-and-play installation. Users can set up the modem quickly without extensive technical knowledge, making it accessible for everyone. The modem comes equipped with an Ethernet port for direct connection to computers or routers, allowing for a streamlined networking setup. Additionally, it supports DHCP, enabling automatic IP address assignment for connected devices.

The DSL-300T also includes several advanced features that enhance its performance and security. It supports various DSL modulation methods, including G.DMT, G.lite, and Splitterless ADSL, providing compatibility with different service providers. Security features such as firewall protection and NAT (Network Address Translation) help safeguard the network from unauthorized access, ensuring a secure online environment.

Furthermore, the modem offers reliable performance with its solid build quality and ongoing software updates from D-Link, which include enhancements and bug fixes. The device is designed to be energy efficient, contributing to lower electricity costs for users.

In summary, the D-Link DSL-300T is a feature-packed ADSL modem that stands out for its ease of use, compatibility, and reliable performance. With support for high-speed internet access and robust security features, it remains a popular choice among users seeking dependable connectivity solutions for their homes and small offices.
Top Page Image Contents