JAI TM-1400 operation manual Getting Started, Camera Setup

Page 5

Installation

2 Installation

The following instructions are provided to help you to set up your camera quickly and easily. We suggest that you read through these instructions before you unpack and set up your camera system.

2.1 Getting Started

2.1.1Unpacking Instructions

We recommend that you save the original packing cartons for the cameras and accessories in case you need to return or exchange an item.

We also recommend that you bench-test any equipment being sent to another location for field installation to assure that everything is fully operational as a system.

2.1.2Components List

Please begin by checking your order against the Components List shown below to assure that you have received everything as ordered, and that nothing has been overlooked in the packing materials. If any item is missing, please contact your JAI PULNiX representative immediately.

•TM-1400 camera

•Document download card (includes instructions on how to download the necessary documentation and software)

2.1.3Accessories and Options

Following is a list of additional accessories and options that may be required for your application. Please check with your JAI PULNiX representative before you install your camera to determine what you might need.

•Digital output cable (not required for “CL” version)

-30DG-02 (for standard model only)

-26CL-02-26 (for Camera Link model only)

•Serial Communication Kit CS-232E (not required for “CL” version)

Note: For CL models, the control software is included and serial communication is through the

Camera Link cable. No additional accessories are required.

•PD-12UUP series power supply

•12P-02S power cable

2.2Camera Setup

2.2.1Heat Dissipation

The TM-1400 camera is a compact 1.3K x 1K camera. Since all the electronics have been packed in a compact package, the outer case of the camera gets hot due to heat dissipation. JAI PULNiX

TM-1400 Series Progressive Scan Shutter Cameras