D-Link DI-701 manual Changing Passwords

CHANGING PASSWORDS

The DI-701 contains 2 passwords, one for standard user access and one for Super Admin access. Your ISP may have set Super Admin access if you purchased your unit through them, and should not be changed in this case. For all other users it is recommended that you change the default passwords to ensure that someone cannot adjust your settings without your knowledge.

Changing the default passwords is a simple task just follow these steps:

1) Go to StartàRun

2)When the Run box appears, type “ telnet 192.168.0.1 333” (if your Local port IP address was changed during the initial configuration, substitute the IP address you set for “ 192.168.0.1” ) and press enter:

3)You should see the following prompts, do as instructed in italics. Please note that passwords are case sensitive, so be sure that you remember whether a letter is upper or lower case and make sure that your Caps Lock is off:

D-Link DI-701, version 2.10

Administrator password : ******** Type “ year2000” and press

<Enter>

ADMIN>passwd Type ‘passwd’ and press <Enter>

Please type old password : ******** Type “ year2000” and

press <Enter>

22