D-Link DI-701 manual Show, Set

COMMANDS>passwd

Old password:

New password (4 characters or numbers at most): ****

Re-typenew password: ****

show

Displays the current configuration. For first-time login, the current configuration is the factory default settings. Refer to section titled “Factory Default Setting” for detail.

Example:

IP address of local port: [192.168.0.1]

SubNetmask of local port: [255.255.255.0]

Distribute IP addresses to local computers: [Yes]

Continuous IP address pool starts at: [192.168.0.2]

Number of IP address in pool: [32]

Obtain global port configuration from ISP: [Yes].. already

3

claimed

IP address of global port: [203.66.99.1]

SubNetmask of global port: [255.255.255.0]

Device name: [Untitled]

Gateway: [203.66.99.254]

Primary DNS server: [205.178.225.1]

Secondary DNS server: [205.178.244.207]

set

The current settings appear by sequence. Press enter to accept the default or current value in the bracket. Enter the appropriate value in the brackets to change it and then press Enter. Press <Esc> at any time to abort this command.

3 Compared with Configuration claiming, meaning the configuration is still under claiming, namely the global port configuration is invalid, Configuration claimed means this device has obtained the global port configuration from the ISP. While in Configuration claiming, the local computer is not able to access the Internet.

38