Column Headings:
IP client the IP address for the local computer
Port client the port number for the local computer
Port fake the translated port code from client port
IP remote the IP address for the computer on Internet being accessed
Port remote the port number for the remote computer
Idle | idle interval (in seconds) since last network frame transaction |
Super Admin Access
The DI-701 supports a super-admin mode that is typically reserved by the ISP or other service provider. It allows a user limit to be set via the usrlimit command in terminal mode. To login with Super Admin access, the factory default password is “year2000”. At boot up, when prompted for the password enter “year2000”. The command prompt will change from “command>” to “admin>”. It is recommended you change this password as quickly as possible to ensure that the device is more secure.
usrlimit
Sets a limit on the number of maximum users that can use the DI-701 to share Internet Access. Please note that once a limit is set, a normal command login will no longer have security rights to change the number of addresses in the IP pool. The Set command will no longer provide this as an option. However, the Show command will display the current usrlimit setting as the size of the pool. To remove the limit, simply enter the limit as 0.
Example:
D-Link IShare, version 2.00
Administrator password : ********
ADMIN>usrlimit
Connective users is limited to 32
Input user limit number, or <ESC> to escape.
Set new user limit number (0 to 128) : 2
Save configuration and reboot ...