Number of IP address in pool : [2]
Obtain global port configuration from ISP : [Yes]
Device name : [Untitled]
Gateway : [192.152.81.100]
Primary DNS server : [192.152.81.1]
Secondary DNS server : [0.0.0.0]
Resetting the BIOS
In the case that you have forgotten your passwords, the DI-701 can be reset to factory defaults (command: Blank password, Super Admin:”year2000”) through the BIOS. For security reasons, the BIOS can only be reset using the console serial port. See the instructions in the “Getting Started (HyperTerminal)” section of this manual for instructions on connecting to the DI-701 via the console serial port.
When connected to the DI-701, during the boot up sequence, you must push the <Esc> key. A prompt “BIOS>” will appear. Type “–p” and then “–g” to reset the BIOS. You can then reboot the unit and login using the factory default passwords.