Freescale Semiconductor, Inc.
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
Monitor Initialization Code Freescale Semiconductor, Inc.
RTCISR | equ | (M328BASE+$B0E) ; Interrupt Status Reg |
RTCIENR | equ | (M328BASE+$B10) ; Interrupt Enable Reg |
RSTPWCH | equ | (M328BASE+$B12) ; Stopwatch Minutes |
| ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005 | |
;ICEM registers |
| |
ICEMACR | equ | (M328BASE+$D00) |
ICEMAMR | equ | (M328BASE+$D04) |
ICEMCCR | equ | (M328BASE+$D08) |
ICEMCMR | equ | (M328BASE+$D0A) |
ICEMCR | equ | (M328BASE+$D0C) |
ICEMSR | equ | (M328BASE+$D0E) |
****************************************************************************
*ADDRESSING OPTIONS
****************************************************************************
;INTERVAL: equ 2
INTERVAL: equ 1
****************************************************************************
*I/O DEVICE OPTIONS
****************************************************************************
*****************************************************************
* WARNING: This file redefines _usr_gchar bypassing the BSP *
*****************************************************************
****************************************
*Setting for ST16C2552
****************************************
#define DEV_IN ST16C2552 #define DEV_OUT ST16C2552
BASE_IN: | equ | $FFFD0000 | ; base address |
| |||
BASE_OUT: | equ | $FFFD0000 | ; base address |
| |||
BAUD_IN: | equ | 576 | ; | baud | rates | = | BAUD_IN/100 bps |
BAUD_OUT: | equ | 576 | ; | baud | rates | = | BAUD_OUT/100 bps |
****************************************
*Setting for
****************************************
;#define DEV_IN EZUART ;#define DEV_OUT EZUART
;BASE_IN: | equ | $fffd8000 | ; base address | not | applicable | ||||
;BASE_OUT: | equ | $fffd8000 | ; base address | not | applicable | ||||
;BAUD_IN: | equ | 1152 | ; | baud | rates | = | 115200 | bps | |
;BAUD_OUT: | equ | 1152 | ; | baud | rates | = | 115200 | bps | |
****************************************
*Seting for ADI PORT on
****************************************
;#define DEV_IN ADIPORT ;#define DEV_OUT ADIPORT
;BASE_IN: | equ | $fffd8000 | ; base address | of input device | ||||
;BASE_OUT: | equ | $fffd8000 | ; base address | of output device | ||||
;BAUD_IN: | equ | 0 | ; | baud | rates | not | applicable | |
;BAUD_OUT: | equ | 0 | ; | baud | rates | not | applicable | |
****************************************
For More Information On This Product,
Go to: www.freescale.com