Motorola WU830G manual Link Status Information, Field or Button Description

SECTION 3 CONFIGURATION

Link Status Information

The Link Status window provides:

!Currently connected network information

!Network settings

!MAC Address

!Signal information

The following table describes the fields and buttons on the Link

Status window:

Field or Button	Description
Network Name	Displays the Service Set Identifier (SSID) of the
	network used by the WU830G. When you first
	access this window, the network with the highest
	signal strength is displayed. You can select a
	different network by selecting the Site Monitor
	tab.
Status	Displays the current connection status of the
	WU830G.
Re-Scan	Clicking this button enables you to search for the
	available wireless networks. This is useful if the
	WU830G was not able to establish a connection
	to the specified network because the link quality
	was poor.
Channel	Displays the channel that the WU830G is using.
	The possible channels are 1 through 11.
Security	Displays the security used on the current wireless
	connection. For example, WEP. For more
	information refer to “Configuring Security
	Settings.”
Transfer Rate	Displays the current transfer rate in megabits per
	second. The possible transfer rates are 1, 2, 5.5,
	11, 18, 24, 36, 48, and 54 Mbps. The transfer
	rate varies dynamically based on the link quality
	on the wireless connection.

3-4 WU830G