Motorola WU830G manual Ssid

CONFIGURATION SECTION 3

6Select the Network Type. The options are Infrastructure or Ad-Hoc. For more information, refer to the description for Network Type in the table following this procedure.

7If your network type is Ad-Hoc, select the Channel. For more information, refer to the description for Channel in the table following this procedure.

8Click Set Security and configure the security for this profile. For more information, refer to “Configuring Security Settings.”

9Click Apply Changes to save the network profile.

The following table provides more information about the fields on the

Profiles tab:

Field or Button	Description
Profile Name	The profile setting enables you to save different
	configurations for different working environments.
	The “default” profile contains the initial
	configuration setting for the WU830G.
Network Name	The Network Name Service Set Identifier (SSID)
(SSID)	identifies and announces the wireless network to
	wireless devices. This is a case-sensitive
	identifier, and must not exceed 32 characters.
	The SSID “any” is a special SSID. It allows your
	wireless device to connect to any available
	access point.
Network Type	Select either Ad-Hoc or Infrastructure mode
	depending on the network type to which you are
	connecting.

!

!

Ad-Hoc mode is used for simple peer to peer networks. It allows the sharing of local resources between wireless cards without using a wireless access point.

Infrastructure mode enables a wireless client to be integrated into an existing network through a wireless access point.

WU830G 3-9