Motorola Illustrates the ICS board, SG2 ICS board SG2-DRT-3X Installation Sheet

Page 8

8STARLINE

To use the SG2-DRT-3X, the SG2000 must be equipped with the ICS plug-in board. The circuitry on this assembly contains 9 dB of attenuation to ensure proper levels into the transmitter input.

Figure 9 illustrates the ICS board.

Figure 9

SG2 ICS board

J1

SG2-DRT-3X Installation Sheet

Image 8

Contents SG2-DRT-3X Installation Sheet Related Documentation Document ConventionsBefore You Begin AsteriskSG2-DRT-3X block diagram SG2-DRT-3X transmitterSG2-DRT-3X side view and laser warning label KeyFeatureDescription SG2440-DR-3X return board Installing the SG2-DRT-3X in the SG2440 NodeSG2440-DR-3X return configuration SG2440 lid Illustrates a properly installed and cabled SG2-DRT-3X Installing the SG2-DRT-3X in the SG2000 Node SG2-DRT-3X cabling for combined configurationSG2 ICS board SG2-DRT-3X Installation Sheet Illustrates the ICS boardSG2000 optical transmitter B and a locations JP1SG2-DRT-3X installed in SG2000 Page Specifications Parameter SpecificationSG2-DRT-3X Dwdm Models ModelModel Description SG2-DRT-3X Cwdm ModelsIf You Need Help Special Symbols That Might Appear on the Equipment EMC Standards