3Com 3CR990SVR97, 3CR990SVR95 Press Enter, Press Insert again, Select 3C99x, and then press Enter

Page 94

94CHAPTER 5: INSTALLING NETWARE CLIENT AND SERVER DRIVERS

4Press Enter.

The Internetworking Conﬁguration screen appears.

5In the displayed menu, select Boards, and then press Enter.

6Press Insert.

A list of currently installed drivers appears.

7Press Insert again.

The New Driver dialog box appears.

8Specify the directory: a:\nwserver\3c99x.lan

9Press Enter.

An updated list of installed drivers appears.

10Select 3C99x, and then press Enter.

You are prompted to name the NIC, for example: 3c99x_1.

11Type the name of the NIC and press Enter.

You are prompted for the slot number. For information on how to verify the slot number, see Verifying the PCI Slot Number on page 99.

12Enter the slot number, and then press Enter.

13Press Esc, Enter (to save), and then Esc.

The Internetworking Conﬁguration screen appears.

14Select Bindings, and then press Enter.

The conﬁgured protocols for installed NICs appears. (This list will be empty if no protocols are currently bound to the NIC.)

15Press Insert.

The Select From the List of Conﬁgured Protocols screen appears.

For NetWare 5.0:

■The default To a Network Interface is selected. Press Enter.

The Select a Conﬁgured Network Interface screen appears.

Image 94

Contents Part No -1742-001 Published May 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Installing and Connecting the NIC Installing Dynamicaccess Software in Windows Installing Netware Client and Server Drivers Configuring the NIC Troubleshooting the NIC Ethercd Content and Navigation Technical Support About this Guide NIC/Description Model NumberIcon Description ConventionsConvention Description Overview Product Name/Description Model NumberData Encryption Onboard 3XP ProcessorLAN Encryption Software for Windows 95/98 3CR990 NIC Features High Encryption Pack for Windows3XP Processor Advanced Server Features Self-Healing Drivers Load BalancingFailover VLANs Primary failureTrafﬁc Prioritization Windows NT and Windows 2000-Planning the Conﬁguration on Server Features Using Other NICsRemote Wake-Up Remote Wake-Up RequirementsRemote Wake-Up and Multiple NIC Installations Integrated Boot ROM with Managed PC Boot Agent MBARemote Wake-Up Cable Desktop Management Interface DMI Remote System Alerts Hot Plug NIC InstallationDhcp Server Prevention DynamicAccess LAN Agent Ofﬂine DiagnosticsWindows 2000 Ofﬂoad Features Installation Overview Safety PrecautionsInstallation Requirements RAMUpgrading Windows 95 to Windows Installing From DisketteInstalling Multiple NICs Updating the Network Driver and NIC SoftwareMaking a DOS-Bootable Diskette Creating Installation DiskettesProduct Registration Follow the prompts as they appear Preparing the NIC and the ComputerDecide whether you want to use Remote Wake-Up Make sure that cable requirements are met Network Envi Cable Required Maximum Ronment Cable LengthInstalling and Connecting the NIC Replace the computer cover and plug in the power cord Carefully insert the NIC in the empty PCI slot, as shownConnecting the Remote Wake-Up Cable Connecting the cable to the NIC backplateReplace the PC cover and plug in the power cord Installing Software Installing NIC Drivers Windows Software Installation RequirementsGetting Help Installing the Network Driver Using the EtherCDWindows Click Next Windows NTClick Finish Click Add Click CloseTurn the PC power on Click Yes to restart the PCYou must restart your computer to complete the installation Click Yes to restart your computerNew Hardware Found Do one of the following Update Device Driver WizardClick Yes Enter the path to the CD-ROM drive, and then click OK Verifying Successful Installation Right-click the My Computer icon, and then click PropertiesWindows 95 and Windows Select the Resources tabInstalling the 3Com NIC Diagnostics Program Updating the Network Driver and NIC Software Starting the 3Com NIC Diagnostics ProgramDouble-click the 3Com NIC Diagnostics icon Restart WindowsInstalling Multiple NICs Windows 2000, Windows 98, and WindowsSelect the Adapters tab Click Add Repeat the process for each additional NIC to be installedInsert the EtherCD Close the Network screen Installing the DynamicAccess LAN Agent for a Client NIC Client PC RequirementsInstalling the LAN Agent Conﬁguring the DynamicAccess LAN Agent Verifying Successful InstallationRestart the PC Removing the DynamicAccess LAN Agent Installing DynamicAccess Software for a Server NICStart Windows Insert the EtherCD in the CD-ROM drive Installing DynamicAccess Software for a Server NIC Conﬁguring Groups and VLANs for a Server NIC Planning the ConﬁgurationConﬁguring Groups and VLANs for a Server NIC Number of VLANs Working With Server Features WindowsWindows NT To disable all load balancing-Clear Double-click the DynamicAccess SW Server iconCreating a Group Click the Load Balance/RSL tab Load Balance/RSL window Adding NICs to a GroupSpecifying a Dedicated IP Address Click Add NICChanging an IP Address Creating a VlanSaving the Conﬁguration Specifying Trafﬁc PrioritiesClick the appropriate tab Removing a NIC from a Group Disabling Load Balancing for a GroupChanging the Primary NIC Click the Load Balance/RSL tabDisplaying Group Properties Deleting or Editing a VlanDisplaying NIC Properties Specifying Failover from Gigabit to 10/100 PCISymptom Tip Troubleshooting a Load Balancing ConﬁgurationDisable load balancing for the group Add 3Com server NICs to the groupChanging Windows 2000 Property Settings Identifying Windows 2000 Miniport and LAN ConnectionsUsing Windows 2000 Ofﬂoad Features Enabling Ofﬂoads Value Offload Function Enabled Click ConﬁgureInstalling DynamicAccess LAN Encryption Software Conﬁguring Ofﬂoads for a Group of Different NICsHardware Requirements Minimum Installation RequirementsInstalling LAN Encryption Software on Windows Software RequirementsClick NIC Software Click Yes to continue Enter your network password when prompted With the Winsock2 Setup screen displayed, click OK Click OKClick Yes Click OK Insert the Windows 95 CD-ROM and click OK Installing LAN Encryption Software on Windows Click Yes to continue Installing Dynamicaccess Software in Windows Adding the Entrust File Starting DynamicAccess LAN Encryption Software Viewing the Administrator’s Guide OnlineUninstalling LAN Encryption Software Page Using the Latest Support Packs Installing and Conﬁguring the NetWare Server DriverNetWare Version Required Support Pack Latest patch files NetWare Version Required Support Pack Obtaining NetWare Loadable ModulesNetWare Server NLM Name Netware Packet Receive Buffers Server Software Installation RequirementsBefore installing NICs After installing two NICs Slot Numbers for Multiple NICsInstalling the NetWare 3.12 Server Driver Obtaining Slot NumbersSave and exit the ﬁle, and then reboot the server Select 3C99x, and then press Enter Press EnterPress Insert again Type the name of the NIC and press EnterPress Esc to Exit Press Enter to save the changesSelect Reinitialize System Loading the 3Com EtherCD Press Enter to select the driverSpecifying the Slot Number Loading the DriverInstalling Multiple Server NICs Load 3C99X.LAN slot=slot1 NAME=name1 FRAME=frametype1Verifying the PCI Slot Number Installing Server FeaturesBoot the NetWare server with the -na option From the Conﬁguration Options screen select Product optionsConﬁguring Groups Enter this commandMake the following changes to the AUTOEXEC.NCF ﬁle Save the AUTOEXEC.NCF ﬁle and return to the server prompt At the system prompt, enter load monitor Verifying the Installation and ConﬁgurationSelect a driver to view its associated statistics Log in or map to the server Changing NetWare Driver Conﬁguration ParametersParameter Range of Values Description Maintaining Groups Reboot the server Install the new secondary NICAdding a Secondary NIC to a Group Install the NICs Adding a Group107 Group Server Feature CommandsDisplay status Help Link timeoutProbe interval Send timeout Receive timeoutRetry count Wait timeout UngroupTroubleshooting a Group Conﬁguration Default NIC Settings Option Description SettingsAuto Select ALL Conﬁguration Methods Method Description RequirementsUsing the 3Com NIC Diagnostics Program Changing General NIC Conﬁguration SettingsMethod Description Using the 3Com DOS Conﬁguration Program Click OK to save the changes and exit the programEnter the following at the DOS prompt d\3c99xcfg.exe Enabling or Disabling the Boot ROM Setting Conﬁguring the Managed PC Boot Agent MBABooting From the Network Set the MBA manually as the ﬁrst boot device BBS BIOS-Compatible PCsMake sure that the NIC boot ROM setting is Enabled Reboot the PCChange the MBA default boot setting from Local to Network Non-BBS BIOS-Compatible PCsDisabling the 3Com Logo Configuring IP Security Encryption Description Type LevelCreating a Security Policy Deﬁning the ConsoleSelect IP Security Policy Management, and then click Add Creating the PolicyClick Next and then Finish Select a Speciﬁc IP Address in the pull-down list Creating a FilterEnter destination IP address, and then click Next Creating the Filter Action Accept the default, and then click NextBinding the Filter Binding the Filter ActionEnabling Encryption Disabling EncryptionInterpreting the LEDs State MeaningViewing the NIC LEDs in the Diagnostics Program LNKAccessing the 3Com NIC Help System Accessing 3Com Support DatabasesAccessing the 3Com Knowledgebase Accessing Release Notes and Frequently Asked QuestionsProblems/Error Messages Troubleshooting the NIC InstallationCleaning Up a Failed Installation Troubleshooting the Network Connection Click Proceed Click OKTip Description Check the computer Bios Troubleshooting Remote Wake-UpMake sure that you are using the latest driver for the NIC Check the Remote Wake-Up cable connectionTroubleshooting a Network Connection Connect a straight-through cable from the PC to the hubTroubleshooting Hubs Cabling PinoutsRemoving the Network Driver Exit the Device Manager and shut down WindowsClick the Device Manager tab Removing DynamicAccess Server Features From the Start menu, select Settings/Control PanelEnter this command at the prompt NetWarePage Running NIC Diagnostics Running the NIC Diagnostics Tests Running the 3Com DOS Diagnostics ProgramReboot the computer using a DOS-bootablediskette Running the Network Test Tab DescriptionViewing the NIC LEDs in the Diagnostics Program Running the NIC TestViewing Network Statistics Click the Statistics tab. The Statistics screen appearsEnabling the Icon Using the 3Com Icon in the Windows System TrayDisplaying Network Statistics Removing the 3Com NIC Diagnostics Program Click Proceed, and then follow the prompts on the screenPage Obtaining Drivers Page Specifications 3CR990 NIC SpeciﬁcationsCabling Requirements Twisted-Pair Cable10BASE-T Operation Category UseRJ-45 Connector Pin Assignments 100BASE-TX OperationPause Frames Flow ControlLink Negotiation Page 3C OM DMI a Gent About the 3Com DMI AgentSystem Requirements Network Management Requirements Installing the 3Com DMI AgentFollow the prompts on the screen Restart the PC when prompted EtherCD Navigation LinksDescriptionText Files Root SubdirectoriesAuto Insert Subdirectory Description165 File Name File DescriptionPage NetWare Fresh Installation Windows Fresh InstallationRequirements Installation Instructions Driver Summary screen, select 3C990.LAN and press EnterWhen the installation is ﬁnished, edit the STARTUP.NCF ﬁle Page Online Technical Services World Wide Web SiteAccess by Analog Modem 3Com Knowledgebase Web Services3Com Bulletin Board Service 3Com FTP SiteSupport from Your Network Supplier 3Com Facts Automated Fax ServiceAccess by Digital Modem 847 262Country Region Telephone Number Asia Paciﬁc Rim Support from 3ComEurope Europe, South Africa, and Middle East Returning Products for RepairCountry Region Latin AmericaTo obtain an authorization number, call or fax Country Region Telephone Number Fax NumberIndex NumbersMBA PCI NIC 131 NLMs Displaying, Windows Self-healing drivers SHDs OSR2 Index Page FCC Class B Statement Industry Canada Class B Emission Compliance Statement Page Product Registration

Related manuals

Manual 14 pages 56.6 Kb