3Com Megahertz 100 manual LAN Card LEDs, Led

4CHAPTER 1: INSTALLING THE PC CARD

LAN Card LEDs

Once the card is connected to the network and the network drivers are installed (described in the following chapters) you will be able to use the connector LEDs to verify link integrity.

Table 1 LAN Connector LEDs

LED On Off Flashing

10 Mbps	Good 10BASE-T	No connection.
	connection between	(Off when 100 LNK
	PC Card and hub	LED is on.)
100 Mbps	Good 100BASE-TX	No connection.
	connection between	(Off when 10 LNK
	PC Card and hub	LED is on.)

There may be a problem with your physical connection. Check that all cables are connected securely.