3Com RMON-EMP-3 installation and operation guide Configuration Menu Flow Chart

Figure 3-1 is a flow chart of the RMON MultiProbe Module configuration menus.

			Main Menu	3
		1 Modify/View configuration values				Warm-start the module
		2 Download new firmware				and exit menus
		3 Warm start and Exit
		4 Cold start and Exit			4
		Enter one of: 1 2 3 4 ?
						Cold-start the module
						and exit menus
		1 Modify/View Configuration Values
	1 Modify/View network settings
	2 Autodiscovery echo interval (secs)
	3 Date
	4 Time					6 Modify/View Serial
	5 Timezone
						Configuration Values
	6 Modify/View serial port settings
					1 Serial port IP address
	S Save changes and exit
	0 Cancel changes and exit				2 Serial port subnet mask
					3 Serial port speed
	2 Download Menu				4 Serial port mode
1 Filename to download					5 Modem Init String
2 tftp server IP address					6 Modem Hangup String
3 Download to firmware
4 Temporary download					7 Modem Connect Responses
0 Return to previous menu					8 Modem No-Connect Responses
					S Save changes and exit
					0 Cancel changes and exit
			Modify/View network settings menu shown on next page

Figure 3-1. Configuration Menu Flow Chart

Configuring the Module 3 - 3