3Com RMON-EMP-3 Using the Modify/View Serial Configuration Values Menu

Table 3-3. Modify/View Configuration Values Menu

Description (Continued)

Option	Result
S	Saves all changes to the configuration menu to
Save Changes and	non-volatile memory and returns to the Main
	menu.
Exit
0	Cancels changes to the configuration menu and
Cancel Changes	returns to the Main menu.
and Exit

Note: All configuration settings except for the Autodiscovery

Echo Interval field value are preserved after a cold start.

Using the Modify/View Serial Configuration Values Menu

Use the Modify/View Serial Configuration Values menu to configure the module RS-232 serial port to run Serial IP (SLIP):

❑Over a direct link

❑Using a modem

The Serial IP feature enables the RMON MultiProbe Module and a network management workstation to communicate when a network link is not available.

To display this menu, select option 6 from the Modify/View Configuration Values Menu and press Return. The Serial Configuration Values menu is displayed with factory-default settings for the serial port (Figure 3-5).

Configuring the Module 3 - 13