Table 3-5. Modem Init Strings and Hangup Strings (Continued)
Command | Result |
|
|
^w | Waits for the reply string that follows which is |
| terminated by the next command or the end of string. |
| Partial and case insensitive matching is applied (that is, if |
| the RMON MultiProbe Module finds the reply string [any |
| case combination] anywhere in the received string, the |
| match is found). If the current timeout elapses without a |
| match, the module ignores the remaining control string. |
|
|
^! | The ^ character. |
|
|
^d | Delays the number of seconds specified by the decimal |
| digits that follow. |
|
|
^b | Sends break for the number of milliseconds specified by |
| the decimal digits that follow. If no digits follow, breakis |
| enforced for 250 ms by default. |
|
|
You may insert the following ASCII control characters into the ^s send string or the ^w reply string:
^@ 0x00
^A 0x01
^M 0x0D
^Z 0x1A
^[ 0x1B
^\ 0x1C
^] 0x1D
^^0x1E
^_ 0x1F
3 - 18 Ethernet RMON MultiProbe Module Installation and Operation Guide