Adaptec 1450 manual Introduction, Contents of Kit, System Requirements

Page 7

Introduction

Congratulations on your purchase of Adaptec’s SlimSCSI® 1450, which is designed specifically for use with Microsoft Windows® 95. The SlimSCSI 1450 allows you to connect up to three SCSI devices to your portable PC, including Zip drives and other kinds of remov- able media drives.

Contents of Kit

■SlimSCSI 1450 PC Card-to-SCSI Adapter, with permanently attached 50-pin high-density cable

■Windows 95 driver diskette

■SlimSCSI 1450 User’s Guide

■50-pin-to-DB25 converter

■Registration card

System Requirements

■Portable PC with a PC Card Type II, Type III, or Toshiba Type IV slot

■Microsoft Windows 95

1

Image 7

Contents Slimscsi 1450 Adapter Adaptec, Inc SlimSCSI 1450 Adapter Page Introduction Page Introduction Contents of KitSystem Requirements Installing the SlimSCSI Installing the SlimSCSI SlimSCSI 1450 Adapter User’s Guide Updating the Windows 95 Miniport Driver Hot Plugging Using the SlimSCSIFormatting Removable Media Scsi IDs Understanding ScsiTerminating the Scsi Bus Scsi Connector TypesGeneral Hardware Troubleshooting TroubleshootingClick Control Panel Windows 95 TroubleshootingClick Control Panel Troubleshooting Double-clickIf you have a hardware conflict Electronic Support Contacting AdaptecSales and Ordering Information Technical and Product SupportCopyright Canadian Compliance Statement Adaptec Software License Agreement Page Limited 5-Year Warranty Page