Adaptec 1450 manual Installing the SlimSCSI

Page 8

SlimSCSI 1450 Adapter User’s Guide

Installing the SlimSCSI 1450

Follow these steps to install the SlimSCSI 1450 and connect your SCSI devices to it:

1Remove the SlimSCSI 1450 from its packaging.

2Plug the 50-pin connector into the first (or only) SCSI device, as shown below. Make sure the SCSI device is not powered.

SCSI Connector	SCSI Device

Terminator

If the SCSI device has a DB25 (25-pin) connector, attach the

50-pin-to-DB25 converter, as shown below, and plug it into the connector on the device.

50-pin-to-25-pin Converter

2

Image 8

Contents Slimscsi 1450 Adapter Adaptec, Inc SlimSCSI 1450 Adapter Page Introduction Page System Requirements Contents of KitIntroduction Installing the SlimSCSI Installing the SlimSCSI SlimSCSI 1450 Adapter User’s Guide Updating the Windows 95 Miniport Driver Using the SlimSCSI Hot PluggingFormatting Removable Media Understanding Scsi Scsi IDsScsi Connector Types Terminating the Scsi BusTroubleshooting General Hardware TroubleshootingWindows 95 Troubleshooting Click Control PanelClick Control Panel Troubleshooting Double-clickIf you have a hardware conflict Contacting Adaptec Electronic SupportTechnical and Product Support Sales and Ordering InformationCopyright Canadian Compliance Statement Adaptec Software License Agreement Page Limited 5-Year Warranty Page