Installing the SlimSCSI 1450
3(Optional) Connect up to two additional SCSI devices by daisy- chaining them to the first device, as shown below:
SCSI Devices
Terminator
4Be sure that each SCSI device has a unique SCSI ID ranging from 0 to 6. If any two devices have the same ID, change the SCSI ID of one device. This is usually done by changing a switch on the back of the device. (For more information, see SCSI IDs on page 8.)
The diagram below shows a typical SCSI device with a select- able SCSI ID switch:
5Terminate the last (or only) SCSI device connected to the SlimSCSI 1450. Read the device documentation if you are not sure how to terminate the device, or refer to Terminating the SCSI Bus on page 9.
3