3Com 10/100BASE-T4 manual Using NetWare ODI, One Adapter in a Client, AutoLink Requirements

Using NetWare ODI 3-5

6Double-click the adapter name to display a description of the adapter and its current status.

The next dialog box confirms that the adapter is working properly.

7Click the Cancel button to leave each dialog box and return to the Control Panel.

Using NetWare ODI

This section describes how to load NetWare drivers in the following networking situations:

■One or more adapters in a client

■One or more adapters in a server

One Adapter in a Client

3Com’s AutoLink installation program automatically installs all necessary NetWare DOS ODI client software, including drivers and modifies the CONFIG.SYS and AUTOEXEC.BAT files. It automatically logs on to the server and updates the client software if your system administrator has already configured a 3Install account on the server. Instructions for configuring a 3Install account are contained in the README.TXT file located in the \QINSTALL\SERVER directory on the 3C59X EtherDisk diskette.

AutoLink Requirements

To use the AutoLink program to install the NetWare DOS ODI driver, your computer must meet the following requirements:

■Use the Novell NetWare 2.x, 3.1x, or 4.x network operating system

■Have only one 3C595-T4 adapter installed

■Have at least 1 MB of hard disk space available

■Be intended for use as a NetWare DOS ODI client

If this does not describe your network environment, refer to the appropriate section later in this chapter.